37
Initial Setup Menus
This function automatically shuts off your TV when there is no signal from the channel or no
operation while the TV is on for 10 minutes.
Press the M
ENU button
π†
To AUTO SHUT OFF
è
To turn ON or OFF
Press the M
ENU button when finished
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text
“NOT RECEIVING A SIGNAL AUTO SHUT OFF
IN 9 MIN.” appears on the screen, and starts the
countdown. If no signal is being received within 10
minutes, the TV shuts itself off.
Auto Shut Off
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
OFF
ON
(3/5)
ILLUMINATION
LANGUAGE
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
ENG. FRAN. ESP.
LOW
XDS ID Display provides a channel’s call letters, the network’s name, and even a program
name. The XDS ID information is provided by the broadcaster.
Press the MENU button
π†
To XDS ID
è
To turn ON or OFF
Press the MENU button when finished
XDS ID
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
OFF
ON
(3/5)
ILLUMINATION
LANGUAGE
CLOSED CAPTION
AUTO SHUT OFF
XDS ID
ENG. FRAN. ESP.
LOW
Press the Menu button when finished
Auto Tuner Setup
The auto tuner setup function is described on page 26 as the interactive plug in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
π†
To AUTO TUNER SETUP
è
To operate
è
To choose CABLE or AIR
†
To START
è
To start the setup
The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
AUTO TUNER SETUP
SELECT OPERATE EXIT
MENU
TUNER MODE
AIR
START
To Next Page
Loading...
Need help?
General
