JVC CA-C55BK User Manual

(vLv0Z ON) 8-1
How to find a track
SEARCH
EOIT TIME
CD.
CHANGER
CD 10KEY
Searching the
contents of CDs
10
cD.
CHANGER
9 INTRO
©
To change discs in the PLUS I tray while playing a CD in the magazine.
1. Press the OPEN/CLOSE & button.
The door opens and the PLUS | tray comes out.
2. Change the discs.
3. Press the OPEN/CLOSE # button again or the DOOR OPEN/CLOSE buiton.
The uray goes back and the door closes.
Q While playing a CD, do not keep the door opened except changing discs.
To Select the Disc, Track or Passage within a Track
By using the Unit
1. If the disc with the track you want is not playing, enter the number of disc you want to using the disc bultons (1 to
6 and P) on the rightmost portion of the CD player.
Q Example: for the third disc (from the bottom) in the magazine, press 3.
For the disc on the PLUS } tray, press P.
2. Select the number of the track you want using the SEARCH/EDIT TIME kd or 3 button.
The selected track starts playing.
Q Each time you press briefly and release the SEARCH/EDIT TIME td or 1 button, the track changes by one.
Press und release the SEARCH/EDIT TIME 1 button to go ahead one track at a time.
Press and release the SEARCH/EDIT TIME @# button to go back one track at a time.
Q Holding down the SEARCH/EDIT TIME #4 or 1 button will fast forward or fast reverse the CD so you can
quickly find particular passage in the selection you are listening to.
By using the Remote Controller
1. If the disc with the track you want is not playing, first press the CD CHANGER button, then enter the number of disc
you want using the numeric keys (1 to 6 and P).
Q Example: for the third dise (from the bottom) in the magazine, press 3.
For the disc on the PLUS tray, press P.
2. Press the CD 1OKEY.
3. Enter the number of the track you want using the numeric keys.
The selected track starts playing.
GQ Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10.
Q > You can also use the <¢ or 4 button to change tracks. However, you cannot fast forward or reverse forward
(o locate a articular passage using the Remote controller.
After you have pressed the ® button on the Remote controller, the numeric keys on the Remote controller
functions as the disc buttons until you change it.
Intro Scan
You can use two types of intro scan functions (Disc Intro Sean and Track Intro Scan) to search for a desired disc or track.
1. Make sure that the CD is not playing and “CONTINUE” lights up on the CD/tuner display.
If not, stop the CD player and press the PLAY MODE button on the Unit until “CONTINUE” tights up on the CD/
tuner display.
2. Press the CD CHANGER on the Remote controller.
3. Press the INTRO on the Remote controller.
Each time you press the button, the intro scan mode changes and lights up on the CD/tuner display in the following
sequence:
-—® DISC INTRO-—— INTRO — No indication —+
4. Press the E>/II button (or ® on the Remote controller).
Disc Intro Scan (when “DISC INTRO” lights up):
Plays the beginning of the first track of each CD for about 15 seconds starting with the disc on the PLUS | tray and
then disc no. 1 disc through disc no. 6 disc in the magazine.
Track Intro Scan (when only “INTRO” lights up):
Plays the beginning of each track of each CD for about 15 seconds starting with the disc on the PLUS | tray and then
disc no. | disc through disc no. 6 disc in the magazine.
With programming,
you can play back
tracks in any order
LAY MODE
How to program
5. Press the SEARCH/EDIT TIME 4 bution (or Hd on the Remote controller) when the desired wack is reached.
Intro sean is canceled and norma! playback starts from the track.
QO If you press the following buttons instead of the SEARCH/EDIT TIME #4 bution, intro scan is also canceled
and then:
* SEARCH/EDIT TIME m: Continuous play starts from the next track.
+ Disc buttons (1 to 6 and P (PULS 1)): Continuous play start from the first wack of the selected disc.
To stop playing, press the B/CANCEL button (or @ on the Remote controller).
To exit intro scan mode, press INTRO so that neither “DISC INTRO” nor “INTRO” lights on the display.
Programming the Playing Order of the Tracks
In addition to the high quality sound which makes the CD such a good way to listen to music, you can change the order
in which the tracks play.
Random Play
The tracks will play in no special order when you use this mode.
Before starting a CD, press the PLAY MODE button repeatedly until “RANDOM” lights up on the CD/tuner display.
When all of the tracks have been played, the CD stops.
To stop playing, press the @/CANCEL button (or af on the Remote controller).
To exit random mode, press the PLAY MODE button until “RANDOM?” is no longer lighted on the CD/tuner display
(the Unit must be in stop mode).
Program Play
You can change the order in which the dises and tracks play, and select only the discs and tracks you want from among
those loaded in the magazine and the PLUS | tray.
Q You can program from either the Unit buttons or the Remote controller, or a combination of both.
Q Youcan program up to 32 steps in any desired order from among the discs in the player. Since a step can be either
a single track or an entire disc with many tracks, the total number of selections which will actually play can be
much larger than 32,
Programming Procedure:
You can only make or change a program when the CD player is stopped.
By using the Unit
1. Press the PLAY MODE button repeatedly until “PROGRAM” lights up on the CD/tuner display.
2. Select a disc with the disc buttons (1 to 6 and P). As soon as a disc is selected, it is memorized and “AL” lights up
on the CD/tuner display. If you want all the tracks on that disc to play as part of the program, skip step 3.
3. To select individual tracks from the selected disc (its number is indicated by the arrow on the display), press the
SEARCH/EDIT TIME 4 or > button.
4. Press the MEMORY button.
Repeat steps 2 - 4 until you have entered aii the tracks you want to program.
6. Press the [>/H button .
The Unit plays the tracks in the order you have programmed them.
oh
By using the Remote controller
1, Press the CD CHANGER.
2. Press the PLAY MODE repeatedly until “PROGRAM” lights up on the CD/tuner display.
3. Select a disc with the numeric keys ({ to 6 and P).
4. Toselect individual tracks from the selected disc enter each number by pressing the CD 10 KEY and using the numeric
keys (1 to 10 and +10).
Example: for track 5, press 5. For track 15, press +10 and 5. For track 20, press +10 and 10.
Q You can aiso use the Hd or P+ to select tracks.
5. Repeat 1 and 3 - 4 until you have entered all the tracks you want to program.
6. Press the >.
The Unit plays the tracks in the order you have programmed them.
To stop playing, press the B/CANCEL (or ll on the Remote Controller) once.
il

JVC CA-C55BK Specifications

General

Brand	JVC
Model	CA-C55BK
Category	Stereo Receiver
Language	English