JVC CA-DXU20 - To give a title to a new group before recording

34
5 Confirm the selection.
6 Enter a title.
• For entering a title, see “How to enter titles” on page 35.
• You can also enter a title using the TV on-screen.
7 Finish the procedure.
“EDITING” and “FINISH” appear on the display.
• To give title to other groups/tracks, repeat steps 3 to 7.
To give a title to a new group before recording
• When you record tracks into “NEW GROUP” on a USB
device (see step 4 of “Recording from a CD onto a USB
device” on page 30), you can give a group title before
starting to record.
1 After selecting “NEW GROUP” in step 4...
2 Edit the group title.
• For entering a title, see “How to enter titles” on
page 35.
3 Finish the procedure.
Recording starts.
ENTER
/SET
Character type
Ex.: When “GRP EDIT” is selected in step 4
GROUP TITLE EDIT
ABCDE
01234
GROUP01
[0 – 9] KEY ENTER LETTERS
[CANCEL] DELETE A LETTER
[ENTER] REGISTER NEW NAME
CHANGE CHARACTER TABLE
MOVE CURSOR
ENTER
/SET
ON
SCREEN
TITLE/DEL
Character type
ENTER
/SET
DX-U20_9[U].book Page 34 Wednesday, March 4, 2009 10:59 AM