PlaynngBackTapes
PlayingBacka Tape
1 Press __ EJECT for the deck you want to use.
\
For Deck B
For Deck A
2 Put a cassette in, with the exposed part of the
tape down and the side you want to play
facing front.
• You can play back only type I tapes.
To stop during play, press II.
To operate the other deck, press TAPE A/B (or A/B on the
remote control), then TAPE I_.
To fast-forward the tape, press _ (or _t/1_1_ on the
remote control). The tape running indicator (_-) starts
flashing quickly.
To rewind the tape, press 41_ (or _l/-ql_l on the remote
control). The tape running indicator (-4) starts flashing
quickly.
To remove the cassette, press A EJECT for deck A or
EJECT A for deck B.
Q
3 Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck
which you have put a cassette into is selected.
To operate the other deck, press TAPE A/B (or A/B on
the remote control).
4 Press TAPE I_.
The tape play starts and the tape running
indicator (_-) starts flashing slowly.
When the tape plays to the end, the deck automatically stops,
I
l_The use of the C-120 or thinner tape is not I
recommended, since characteristic deterioration
I
may occur and this tape easily jams in the pinch-
rollers and the capstans.
22
To Next Page
Loading...
