39
Recording sound directly from a CD to a USB device
1 Connect the USB device.
• Refer to page 19.
2 Press [USB 6].
3 Press 7 to stop playback.
4 Use [GROUP/TITLE SKIP], 4 or
¢ to select the desired track/
group.
• To select a group, press [GROUP/TITLE
SKIP] repeatedly while holding down
[SHIFT].
• To select a track, press 4 or ¢ repeat-
edly.
• When you select the last track in a group,
the group is also deleted.
5 Press [TITLE/DELETE] repeatedly
to select “TR DEL” or “GR DEL” in
the display window.
• Select “TR DEL” to delete a track.
• Select “GR DEL” to delete a group.
6 Press [ENTER/SET].
• To cancel deleting the track/group, press
[CANCEL].
7
Press [ENTER/SET].
1 Connect the USB device.
• Refer to page 19.
2 Press [USB 6].
3 Press 7 to stop playback.
4 Use [GROUP/TITLE SKIP], 4 or
¢ to select the desired track/
group.
• To select a group, press [GROUP/TITLE
SKIP] repeatedly while holding down
[SHIFT].
• To select a track, press 4 or ¢ repeat-
edly.
5
Press [TITLE/DELETE] repeatedly to
select “TR TITLE” or “GR TITLE” in
the display window.
• Select “TR TITLE” to add a title to a track.
• Select “GR TITLE” to add a title to a group.
6 Press [ENTER/SET].
• The title of the selected track/group appears
in the display window.
Example: Display window
TV screen
7 Enter a title.
• Refer to “Entering a title” on page 40.
8 Press [ENTER/SET].
NOTE
• When you want to quit editing a title, press 7.
Deleting a track/group from a
USB device
Adding (Editing) a title to a
track/group on a USB device
Character type (Refer to page 40.)
Recording sound directly from a CD to a USB device (continued)
UX-GN7V[US]EN-08.fm Page 39 Friday, May 8, 2009 5:41 PM
To Next Page
Loading...
