JVC Connected Cam GY-HC550U - Live Streaming Item

Live Streaming Item
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On, ROff]
Memo :
0
“On” cannot be selected if streaming is not
possible with
the selected resolution, frame rate
and bitrate combination.
0
“On” cannot be selected if connection of the
selected network is not established.
0
“On” cannot be selected when FTP is running.
0
Live
streaming
switches to “Off” when the power
is turned off.
9
Auto Restart
When the network is reconnected after
disconnection, live streaming will resume
automatically.
0
On:
Once the
network is reconnected, live streaming
resumes automatically.
0
Off:
Live streaming does not resume automatically
even when the network is reconnected.
[Setting Values: On, ROff]
Memo :
0
When the power of the camera is turned off,
regardless of the settings in [Auto Restart]
, live
streaming does not begin automatically even
when power is turned on again and network
connection is established.
0
The setting cannot be changed during live
streaming (when
live streaming is configured to
“On”).
Server
For selecting the server for live streaming.
[Setting Values: RServer1, Server2, Server3,
Server4]
Memo :
0
The setting cannot be changed during live
streaming (when [
Live Streaming] set to “On”).
9
Streaming Server
For setting the server for live streaming.
Memo :
0
The setting cannot be changed during live
streaming (when [
Live Streaming] set to “On”).
9
Server1, Server2, Server3, Server4
* The name that is set in
[Alias] is displayed
individually.
o
Alias
For setting a name to distinguish the settings of this
camera.
The name set in this item will be displayed in the
[Server] options.
*1 The default value is
“Server1/Server2/
Server3/Server4”.
*2 You can enter up to 31 characters and ASCII
characters.
o
Type
For configuring the system for transferring video
and audio to be distributed.
[Setting Values: RMPEG2-TS/UDP, MPEG2-TS/
TCP, MPEG2-TS/RTPRTSP/RTP, ZIXI, RTMP]
A
[Setting Values: RMPEG2-TS/UDP, MPEG2-TS/
TCP, MPEG2-TS/RTP, RTSP/RTP, RTMP] B
Memo :
0
Use reception devices that are compatible with
the respective transfer systems.
0
To use the “ZIXI
” setting, a dedicated server is
needed separately. A
0
The following items that can be set vary
depending on the setting of this item.
o
Destination Address
For setting details such as the host name and the
IP address of the live distribution destination.
*
Enter not more than 127 characters using
single-byte
alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
Network Menu
137
Menu Display and Detailed Settings