FTP Resume Feature
When FTP transfer starts and there is a file of the
same name on the server with a file size smaller
than the
file to be transferred, the file on the server
will be regarded as an interrupted file during a FTP
transfer. A confirmation screen to resume transfer
(append writing) appears.
.
If “Resume” is
selected,
FTP transfer is carried out
such that it appends from the position where it was
interrupted.
When FTP transfer ends normally, “Complete”
appears on the screen.
Memo :
0
FTP server equipped with resume function is
required.
0
If [Network] B [Upload Settings] B [Clip
Server] B [Clip-FTP1/2/3/4] B [Protocol] is set
to “SFTP”, the resume function is disabled.
0
If “HTTP
” is selected in the [Select FTP Proxy
]
screen of the network connection setting, the
resume function is disabled.
Connecting from a Web
Browser
You can access the web functions of this camera
recorder via a web browser on devices such as a
smartphone, tablet terminal, or PC.
Make the
necessary preparations for connection in
advance.
(A P178 [Camera Setup for Network
Connection] )
1
Set the camera recorder to the Camera
mode, and display
[Connection Setup
]
(status screen).
0
Press the [STATUS] button on the camera
recorder to display the status screen. Press
the cross-shaped button (HI
) to display the
[Connection Setup] screen.
0
Check the displayed
[
IP Address].
2
Start up the web browser on the terminal
you wish to connect to the camera
recorder, and enter the [IP Address] in the
address field.
(Example: 192.168.0.10)
If “192.168.0.10” is displayed in [IP Address],
enter “http://192.168.0.10”.
.
3
Enter the user name and password.
Enter the user name and the password on the
login screen to display the main page of the
camera.
0
Check the [Web Username
] and [Web
Password] in the [Network] screen (status
screen).
Memo :
0
The user name and password can be changed
in [Network] B [Web]
B [Username] and
[Password].
(A P141
[ Username ] )
(
A P141 [ Password ] )
186
FTP Resume Feature
Network
To Next Page
Loading...
