JVC Connected Cam GY-HC550U - Uploading Clips Automatically (Auto FTP); Uploading Clips Manually (Manual FTP)

Uploading Clips Automatically (Auto
FTP)
The following are steps to automatically upload
clips recorded
in a recording media to a preset FTP
server.
1
Configure the settings for automatic
upload
Configure [Network] B [Upload Settings] B
[Upload]
to
“Auto” and configure the settings for
each of [Slot], [Cellular] and [Server].
(A P142 [ Upload ] )
.
2
Start uploading
0
Configuring [Network] B [Upload Settings]
B
[Auto Upload] to “On” starts uploading.
0
You can also press the user button that is
assigned with
“Auto Upload”.
Memo :
0
FTP transfer
is performed for the slot configured
in [Slot].
0
If recording is started for the same slot as the
one configured in [Slot] while FTP transfer is in
progress, FTP transfer will be interrupted.
0
FTP transfer is not performed while live
streaming or Return over IP is in progress.
0
FTP transfer is disabled when [System]
B
[Record Set] B [Record Format] B [System] is
configured to “High-Speed”. To perform FTP
transfer, select a setting other than “High-
Speed”.
Uploading Clips Manually (Manual FTP)
The following are steps to upload clips recorded in
a recording media to a preset FTP server.
All playable clips on the thumbnail screen can be
uploaded.
1
Configure the FTP server for manual
uploading
Set [Network] B [Upload Settings] B [Upload]
to “Manual
”.
(
A P142 [ Upload ] )
2
Register the [Clip Server].
0
Open the [Network
]
B [Upload Settings] B
[Clip Server] screen.
0
Register the server to upload recorded clips
in the recording media to.
Up to 4 servers can be registered.
(A
P143 [ Clip Server ] )
Memo :
0
For details
on the registered information, please
consult the network administrator for the server.
0
When [Network] B [Upload Settings] B [Upload]
is configured to “Auto”, manual uploading is also
disabled for slots other than the selected “Slot”.
To perform manual uploading, select “Manual”.
0
FTP transfer is disabled when
[System
] B
[Record Set] B [Record Format] B [System] is
configured to “High-Speed”. To perform FTP
transfer, select a setting other than “High-
Speed”.
Uploading a Video Clip
1
Set the camera recorder to the Media mode.
0
Press and hold the [MODE] selection button
in the Camera mode to enter the Media
mode. A thumbnail screen of the clips
recorded on the recording media is
displayed.
0
You can upload the selected clips on the
thumbnail screen to the FTP server.
(A P97 [Thumbnail Screen] )
Uploading a Recorded Video Clip
183
Network