JVC CV532PJ - Page 4

- 4 -
surfaces likely to be contacted by the patient or an attendant who can touch the
patient. This encloses a space within the room 1.83 m (6 feet) beyond the perimeter of
the bed in its intended location, and extending vertically 2.29 m (7–1/ 2 feet) above the
oor.
Equipment Classication
● Type of protection against electric shock: Class I equipment
● Protection against harmful ingress of water: Ordinary Equipment (IPX0)-No protection.
● Mode of operation: Continuous operation
Erp Information for the external power supply
Information
published
Value and
precision
Unit Notes
Manufacturer’s name
or trade mark
Lite-On Technology
Corporation
-- --
commercial
registration
number, address
22F., No.392, Ruei
Kuang Rd., Neihu Dist.,
Taipei City 114, Taiwan
-- --
Model identier PA-1061-81 -- --
Input voltage 100–240 V Specied by the manufacturer. Shall
be a value or a range.
Input AC frequency 50/60 Hz Specied by the manufacturer. Shall
be a value or a range.
Output voltage 12.00 V Nameplate output voltage. Shall
indicate whether is AC or DC. In
cases where more than one physical
output or more than one output
voltage at load condition 1 are
measured, the sets of available
Output voltage — Output current
– Output power shall be published.
Output current 5.00 A Nameplate output current. In cases
where more than one physical
output or more than one output
voltage at load condition 1 are
measured, the sets of available
Output voltage — Output current
– Output power shall be published.
Output power 60.00 W Nameplate output power. In cases
where more than one physical
output or more than one output
voltage at load condition 1 are
measured, the sets of available
Output voltage — Output current
– Output power shall be published.
Average active
eciency
88.71 % Declared by the manufacturer
based on the value cal-culated as
arithmetical mean of eciency at
load con-ditions 1–4. In cases where
multiple average active eciencies
are declared for multiple output
voltages available at load condition
1, the value published shall be the
average active eciency declared
for the lowest output vol-tage.