JVC D-ILA DLA-HD1-BC User Manual

(No.PA023)1-13
2.8 FACTORY SHIPPING SETTING
Item Adjustment range Initial value Function
Image Adjust
Contrast
Brightness
Color
Tint
Sharpness
DNR
-30 - 30
-30 - 30
-30 - 30
-30 - 30
-30 - 30
0 - 30
0
0
0
0
0
0
Adjusts the contrast of the projected image.
Adjusts the brightness of the projected image.
Adjusts the color density of the projected image.
Adjusts the hue of the projected image.
Adjusts the outline of the projected image.
Adjusts the strength of noise removal of the projected image.
Color Temp.
Red
Green
Blue
Low /Middle/High/User1/User2
-255 - 0
-255 - 0
-255 - 0
Middle
0
0
0
Sets the color temperature of the projected image.
R-gain adjust
G-gain adjust
B-gain adjust
Gamma Normal/A/B/C Normal Sets the gradation characteristics of the projected image.
Offset
Red
Green
Blue
-30 - 30
-30 - 30
-30 - 30
0
0
0
R-offset adjust
G-offset adjust
B-offset adjust
Pixel Adjust
Horiz. Red
Horiz. Green
Horiz.Blue
Vert. Red
Vert. Green
Vert. Blue
1 - 7
1 - 7
1 - 7
1 - 5
1 - 5
1 - 5
4
4
4
3
3
3
Adjust REGI (Pixel shift) of Horizontal Red
Adjust REGI (Pixel shift) of Horizontal Green
Adjust REGI (Pixel shift) of Horizontal. Blue
Adjust REGI (Pixel shift) of Vertical Red
Adjust REGI (Pixel shift) of Verticall. Green
Adjust REGI (Pixel shift) of Vertical Blue
Image Profile Cinema/Natural/Dynamic/User1/
User2/User3
Natural Configures the image profile.
Profile Memory Save User1/Save User2/Save
User3/Clear User1/Clear User2/
Clear User3/Reset Cinema/Re-
set Natural/Reset Dynamic
- Registers or deletes image profiles.
Picture Position
Horizontal
Vertical
The display position value varies
with the input signal.
The display position value varies
with the input signal.
0
0
Adjust of Horizontal picture position
Adjust of Vertical picture position
HDMI Input Level Standard/Enhanced Standard Configures the input level setting of the HDMI input terminal.
Mask 2.5%/5%/Off Off Masks (Hides) the outer area of the projected image.
COMP. Y Pb/Cb Pr/Pr/RGB/SCART Y Pb/Cb Pr/Pr Configures the input signals of the component video input ter-
minals.
HDMI Auto/YCbCr(4:4:4)/YCbCr(4:2:2)/
RGB
Auto Configures the input signals of the HDMI input terminal.
Aspect 4 : 3/16 : 9/Zoom Configures the screen size (aspect ratio) of the projected im-
age.
Film Mode Auto/Off Auto Select this to view movies shot on film.
Color System Auto/NTSC/NTSC4.43/PAL/PAL-
M/PAL-N/SECAM
Auto Configures the color system.
Black Level 0%/7.5% 0% Configures the black level.
Menu Position Upper left/Upper center/Upper
right/Left center/Center/Right
center/Lower left/Lower center/
Lower right
center Sets the display position of the menu.
Menu Display 15 sec/On 15 sec Sets the duration for displaying the menu.
Line Display 5 sec/Off 5 sec Sets whether to display the input when switching input.
Flip H On/Off Off Select this when the image is projected from the back of the
screen or when the projector is hung from the ceiling.

JVC D-ILA DLA-HD1-BC Specifications

General

Brand	JVC
Model	D-ILA DLA-HD1-BC
Category	Projector
Language	English