Collaboration with Panasonic UHD BD Player DP-UB9000
Selecting one of two special projector color profiles from the HDR Display Type of the DP-UB9000 enhances
dimensionality and improves gradation accuracy by tone mapping HDR video to match the JVC projector display
characteristics.
Step 1:
Using Panasonic DP-UB9000: Select “High Luminance Projector” or “Basic Luminance Projector” from HDR Display
Type Setting.
DP-UB9000 MENU: Player Settings " Advanced Settings " HDR Display Type
Step 2:
Using Panasonic DP-UB9000: Set HDR Optimizer “On” from OSD menu.
Step 3:
Using JVC Projector: Set “Picture Mode” as follows.
1
Set “Picture Mode” to “Pana_PQ” (P. 28)
2
Set “Color Profile” (P. 30) manually based on the following chart
Projector Color Profile
DP-UB9000
HDR Display Type
Effects on the Video Image
Pana_PQ_HL High Luminance Projector Prioritizes highest image brightness with good color.
Pana_PQ_BL Basic Luminance Projector Prioritizes best color reproduction with slightly reduced
brightness.
3
The HDR gamma data is reflected inside the above Projector Color Profiles. As a
result, the HDR Gamma mode is not used. Instead, Set “Color Temp.” to “6500K”
(P. 52) and “Gamma” to “2.2” (P. 38
)
MEMO
0
To
watch
HDR10 content in the preconfigured “Pana_PQ” picture mode, it is recommended that you configure “Input
Signal”"“Auto Pic.Mode Select”"“HDR10” to “Pana_PQ”. (“Auto Pic.Mode Select”P. 59)
36
Adjust/Set
To Next Page
Loading...
