14
6 After installation is complete, click the “>>” button.
7 Enter a Screen Size (width across corner, inch) and Viewing
Distance, and click the “START” button.
8 The recommended settings are displayed.
Picture Tone -W
Dark Level
Bright Level
Color
To view images in these settings, click the “AFTER” button. The
recommended setting is applied to the projector.
To save these settings, press the button while the
“BEFORE” button is displayed on the screen.
To restore to the original settings, click the “BEFORE” button.
The settings of the projector will be restored to the original
settings.
If the settings are inappropriate, take the measurements again.
To exit, click (to return to the top menu).
Click
Click
Screen Size
Viewing Distance
Recommended
Settings
JVC_PCS_manual.fm 14 ページ ２０１４年７月２９日 火曜日 午後６時５０分
To Next Page
Loading...
Need help?
General
