Saving and Retrieving Adjustment Settings
The Focus, Zoom, and Shift settings can be saved or retrieved, so you can switch
easily to a different aspect ratio (screen size) according to the image.
0
In a state where no adjustment settings are saved (factory default), only “Lens
Memory Save” is displayed.
0
Operation of the lens control feature is disabled when the lens lock is set to “On”.
Saving an adjustment data
1
Adjust focus, zoom, or shift (P. 23)
2
Press the [MENU] button to display the menu and select
“Installation”"“Lens Control”"“Lens Memory Save”
MENU
BACK
-----
-----
-----
-----
-----
-----
-----
-----
-----
>>
-----
Back
Operate
Select
Exit
Lens Memory Save
Installation
3
Select the item to save, and press the [OK] button
0
The adjustment data is saved.
0
Items with no adjustment data saved are displayed as [----].
0
If you have selected an item for which an adjustment data has already been
saved, the old data will be overwritten.
0
You can change the name when saving an item. (P. 25)
0
The maximum number of items can be saved is 10 for E T and 5 for
G.
4
Press the [MENU] button to exit
SETTING MEMORY
MODE 1 MODE 2 MODE 3
ANAMO.
HDR
C.M.D.
COLOR
PROFILE
GAMMA
SETTINGS
PICTURE
MODE
42
3
24
Operate
To Next Page
Loading...
