JVC DT-V1900CG - Input Card Signal Compatibility

ENGLISH
440
377
285
375
380.4
372
206
336
95.7
496
VOLUME
SLOT 1
A
B
DEGAUSS
MENU
MUTING
SCREENS
CHECK
ASPECT
AREA
MARKER
UNDER
SCAN
PULSE
CROSS
COLOR
OFF
SLOT 2
C
D
SLOT 3
POWER
E
F
INPUT SELECT
VOLUME
SLOT 1
A
B
DEGAUSS
MENU
MUTING
SCREENS
CHECK
ASPECT
AREA
MARKER
UNDER
SCAN
PULSE
CROSS
COLOR
OFF
SLOT 2
C
D
SLOT 3
POWER
E
F
INPUT SELECT
SPECIFICATIONS
䡲 Type : Multi-Format Monitor
䡲 Picture Tube : 19" measured diagonally
䡲 Effective
Screen Size : Width : 370 mm
Height : 270 mm
Diagonal : 460 mm
䡲 Scanning
Frequency : H : 15 kHz/15 kHz – 45 kHz
V : 50 Hz – 100 Hz
䡲 Video Band : Component : 25 MHz (–3 dB)
Video (Y/C) : 8 MHz (–3 dB)
䡲 Horizontal
Resolution : Video (Y/C) : 600 TV lines
1080/60i : 900 TV lines
䡲 Input
Terminals : Installing an optional input card in SLOT 1,
2, or 3 is required.
INPUT A/INPUT B: Terminals on the input
card in SLOT 1
INPUT C/INPUT D: Terminals on the input
card in SLOT 2
INPUT E/INPUT F: Terminals on the input
card in SLOT 3
䡲 Compliant
Video Signal : NTSC (3.58 MHz)/PAL (4.43 MHz)
(using the IF-C01PNG)
480i/576i/480p/1080i (60 Hz/24psF)/720p
(using the IF-C01COMG)
D1 serial digital (using the IF-C01SDG)
HD serial digital (using the IF-C01HSDG/
IF-C12HSDG)
[Dimensions]
Unit : mm
<Front View with the wide mask attached>
* Illustrations and pictures used in this manual have been
exaggerated, abbreviated or compounded for explanatory purposes
only. The appearance of the actual product may differ slightly.
* Dimensions and weight are approximate.
* E. & O.E. Design and specifications subject to change without
notice.
<Front View >
䡲 Remote Inputs : • Point-of-contact connection, 1 line,
D-sub connector (15-pin 3-line)
• Serial connection, 1 line, D-sub connector
(9-pin), compliant to RS-232C
䡲 Audio Output : 1 W (monaural)
䡲 Built-in
Speaker : 8 cm round x 1
䡲 Environmental
Conditions : Operating temperature : 5°C – 35°C
Operating humidity : 20% – 80%
(non-condensing)
䡲 Power
Requirements : 120 V/230 V AC, 50 Hz/60 Hz
䡲 Power
Consumption
(120 V/230 V) : 1.8 A/1.0A (when input card is inserted)
Max. 2.1 A/1.2 A (when input card is
inserted)
䡲 Dimensions : Width : 440 mm
Height : 375 mm
Depth : 496 mm
(not including wide mask and input card)
䡲 Weight : 29.4 kg
(not including wide mask and input card)
䡲 Accessory : AC power cord
: Power cord holder x 1 (case and cover)
: Screws x 2 (Power cord holder)
: Wide Mask x 1
: Screws x 4 (Wide Mask)
<Side View>
25
LCT1116-001A(EN) 02.1.29, 2:54 PM27