Still Image Recording
.
Press halfway
If the mode is A
video, tap A on the
touch screen, then
tap B to switch.
Check if the
recording mode
is B still image.
Set the focus on the subject.
Press fully
Lights up in green when
focused
Lights up during still
image recording
Take a still image.
0
You can also tap
Q
on the touch screen to record. However, focus cannot be set by pressing halfway.
NOTE
0
While this unit may be used with the LCD monitor reversed and closed, the
temperature rises more easily. Leave the LCD monitor open when using this unit.
0
The power may turn off to protect the circuit if the temperature of this unit rises
too much. When the temperature of this unit rises during recording, 7 will
turn yellow to alert.
9
To Next Page
Loading...
