To Next PageTo Next PageWhy does the color of images look strange on my JVC Everio GZ-HD10?
If the color of images looks strange on your JVC Camcorder, and the white balance was not correctly adjusted during recording. Also, if the video was recorded with x.v.Color™ set to [ON], change the setting as desired on TV. You can also set [EFFECT] to [OFF].
How to fix JVC Everio GZ-HD10 when no power is supplied?
If your JVC Camcorder isn't getting power, try these steps: First, ensure the AC adapter is correctly connected. If that doesn't work, try recharging the battery.
Why does the LCD monitor appear blank on my JVC Everio GZ-HD10?
If the LCD monitor on your JVC Camcorder appears blank, try operating the camera. If the camera hasn't been used for a while when connected to the AC adapter, it might be in sleep mode, which turns off the LCD monitor.
Why can noise be heard on my JVC Everio GZ-HD10 recordings?
Avoid sudden movements of the JVC Camcorder during recording, as the driving sound (hum) of the hard disk may be recorded.
What to do if my JVC Everio GZ-HD10 Camcorder recording cannot be performed?
If you're unable to record with your JVC Camcorder, make sure that the LCD monitor is open to turn on the camera. Also, verify that you have selected the recording mode by pressing the PLAY/REC button.
Why does video movement appear jerky on my JVC Camcorder?
If video movement appears jerky or like it is frame dropping on your JVC Camcorder, make sure the icon that represents the function is displayed. You can also set [SHUTTER SPEED] to [AUTO] and [EFFECT] to [OFF].
Why does mosaic-type noise occur when recording with my JVC Everio GZ-HD10 Camcorder?
If mosaic-type noise occurs when recording scenes with fast movement or extreme brightness changes on your JVC Camcorder, record videos with a high-quality mode, such as XP, FHD, or 1440 CBR mode.
Why is my JVC Everio GZ-HD10 Camcorder remote control not working?
If the remote control for your JVC Camcorder isn’t working, try these solutions: replace the battery in the remote. Also, ensure that the REMOTE setting in the BASIC SETTINGS is set to ON. Keep in mind that the remote might not work outdoors or in areas with strong light.
How to fix a JVC Everio GZ-HD10 recorded subject that is too bright?
If the recorded subject is too bright when using your JVC Camcorder, set the backlight compensation to [OFF] if it is currently enabled. You can also adjust the brightness to the [–] side.
Why does digital zoom not work on my JVC Camcorder?
If the digital zoom is not working on your JVC Camcorder, change [ZOOM] to [40x] or [200x]. Also, deactivate any effect and/or focus assist features that are enabled.
General| Optical Zoom | 10x |
|---|---|
| Digital Zoom | 200x |
| Aperture | F1.8 - F2.4 |
| Image Stabilization | Optical |
| LCD Screen Resolution | 207, 000 pixels |
| Storage | HDD |
| HDD Capacity | 60 GB |
| HD Output | HDMI |
| USB Interface | USB 2.0 |
| LCD Screen Size | 2.8-inch |
| Video Resolution | 1920 x 1080 |
| Lens | JVC HD Lens |
| Recording Format | AVCHD |
| Microphone | Built-in stereo microphone |
