To Next PageTo Next PageWhy does my JVC Everio GZ-HM30 stop recording automatically?
Your JVC Camcorder might automatically stop recording to protect its internal circuits from overheating. This can happen when the temperature rises inside the unit. To resolve this, turn off the camcorder, wait for a while to allow it to cool down, and then turn it back on. Also, note that recording will automatically stop after 12 hours of continuous recording.
What to do if desired files cannot be found on the index screen (thumbnail display) of my JVC Everio GZ-HM30?
If you can't find your files on the index screen of your JVC Camcorder, ensure that you have appropriately set the “VIDEO QUALITY” in the recording menu before selecting the playback mode.
What to do if my JVC Everio GZ-HM30 Camcorder is heating up?
If your JVC Camcorder heats up, don't worry, this is normal. The unit may become warm when used for a long time, and it is not a malfunction.
What to do if my JVC Everio GZ-HM30 sound or video is interrupted?
If the sound or video on your JVC Camcorder is interrupted, especially at the connecting section between two scenes, it is generally not a malfunction. Sometimes playback is interrupted at the connecting section between two scenes.
Why the lamp does not flash during battery pack charging of my JVC Everio GZ-HM30 Camcorder?
The lamp on your JVC Camcorder might not flash during battery pack charging for a couple of reasons. First, check the remaining battery power; if the battery pack is fully charged, the lamp will not flash. Second, when charging in a hot or cold environment, ensure that the battery is being charged within the permitted temperature range. Otherwise, charging may stop to protect the battery pack.
How to set date/time display on JVC Everio GZ-HM30?
To display the date and time on your JVC Camcorder, set “ON-SCREEN DISPLAY” in the playback menu accordingly.
Why does POWER/CHARGE lamp start blinking when the monitor is closed on my JVC Everio GZ-HM30 Camcorder?
The POWER/CHARGE lamp on your JVC Camcorder blinks when the monitor is closed because the battery pack is being charged.
Camera Specifications| image sensor | 1/5.8" 1.5MP CMOS |
|---|---|
| lens | KONICA MINOLTA HD LENS F1.8 |
| optical zoom | 40x |
| dynamic zoom | 70x |
| digital zoom | 200x |
Display| lcd size and resolution | 2.7" 230K-pixel |
|---|---|
| high definition recording | AVCHD Lite 1280x720 |
| standard definition recording | Yes |
Recording| video recording modes | AVCHD Lite (LS/LE), AVCHD SD (SSW/SEW/SS/SE) |
|---|---|
| video recording time (max.) | 13hr (LS) / 47hr 40min (SEW/SE) |
| 1080/60P output | Yes (Upconverted) |
Connectivity| hdmi terminal | Yes |
|---|---|
| eye-fi card ready for wi-fi connection | Yes |
| bundled pc software | Everio MediaBrowser 3 |
Weight and Dimensions| dimensions with battery | 51x55x119 mm |
|---|---|
| weight with battery | 215 g |
