JVC Everio GZ-HM330 BEK - Recording Menu (Still Image); Face Priority Ae;Af

Recording Menu (Still Image)
You can adjust various settings, such as brightness and white balance, to suit the subject or purpose. You can also change settings such as picture quality
and gain.
Setting Details
MANUAL SETTING Recording settings can be adjusted manually.
●
They are displayed only when recording in the manual mode.
"Manual Settings Menu" （A P.104）
FACE PRIORITY AE/AF Detects faces and adjusts the brightness and focus automatically.
"FACE PRIORITY AE/AF" （A P.100）
LIGHT Turns on/off the light.
"LIGHT (GZ-HM330)" （A P.101）
SELF-TIMER Use this when taking a group photo.
"SELF-TIMER" （A P.101）
SHUTTER MODE Continuous shooting settings can be adjusted.
"SHUTTER MODE" （A P.102）
IMAGE SIZE Sets the image size (number of pixels) for still images.
"IMAGE SIZE" （A P.102）
IMAGE QUALITY Sets the image quality.
"IMAGE QUALITY" （A P.103）
GAIN UP Makes the subject appear bright automatically when recording in dark places.
"GAIN UP" （A P.103）
AUTO REC Enables the unit to record still images automatically by sensing the changes in brightness within the red frame displayed on
the LCD monitor.
"Recording Automatically by Sensing Movements (AUTO REC)" （A P.35）
FACE PRIORITY AE/AF
Detects faces and adjusts the brightness and focus automatically.
Setting Details
OFF Deactivates the function.
ON Activates the function.
Displaying the Item
1
Select still image mode.
.
2
Touch D to display the menu.
.
3
Select “FACE PRIORITY AE/AF” and touch C.
.
CAUTION:
●
When “FACE PRIORITY AE/AF” is set to “ON”, the following settings will
change.
・
If “SCENE SELECT” is set to “SPOTLIGHT”, it will be switched to “OFF”
.
・ If “FOCUS” is set to “MANUAL”, it will be switched to “AUTO”.
・ If “FOCUS ASSIST” is set, “FOCUS” will be switched to “AUTO”.
・ If “BACKLIGHT COMP.” is set to “ON”, it will be switched to “OFF”.
・ If “METERING AREA/ TYPE” is set to “SPOT”, it will be switched to
“ENTIRE SCREEN”.
●
When the following settings are made, “FACE PRIORITY AE/AF” will
switch to “OFF”.
・ When “SCENE SELECT” is set to “SPOTLIGHT”
・ When “FOCUS” is set to “MANUAL”
・ When “FOCUS ASSIST” is selected
・ When “BACKLIGHT COMP.” is set to “ON”
・ When “METERING AREA/ TYPE” is set to “SPOT”
Memo:
●
You cannot activate “FACE PRIORITY AE/AF” if “SELF-TIMER” is set to
“FACE DETECTION”.
●
Depending on the condition, faces may not be detected.
Menu Settings
100