Backing Up All Files
Before making backup, make sure that enough free space is left in the PC's
hard disk (HDD).
1
Connect the USB cable and AC adapter.
.
① Connect the AC adapter to this unit.
② Connect using the provided USB cable.
2
Open the LCD monitor.
.
●
The USB MENU appears.
3
Select “BACK UP” and touch C.
.
●
The provided software Everio MediaBrowser starts up on the PC.
The subsequent operations are to be performed on the PC.
4
Select the volume.
.
5
Start backup.
.
●
Backup starts.
6
After backup is complete, click “OK”.
.
Memo:
●
Before making backup, load the SD card in which the videos and still
images are stored on this unit.
●
If you encounter any problems with the provided software Everio
MediaBrowser, please consult the "Pixela User Support Center".
"Trouble with Using the Provided Software Everio MediaBrowser" （A
P.85）
●
Delete unwanted videos before making backup.
It takes time to back up many videos.
"Deleting Unwanted Files" （A P.47）
Disconnecting this Unit from PC
1
Click “Safely Remove Hardware”.
.
2
Click “Safely Remove USB Mass Storage Device”.
3
(For Windows Vista) Click “OK”.
4
Disconnect the USB cable and close the LCD monitor.
Copying
86
To Next Page
Loading...
