JVC Everio GZ-HM860 - Using the Remote Control

Using the Remote Control
You can operate this unit from a distance away using the supplied remote
control.
.
Memo :
0
Point the remote control toward the sensor directly and use it within 5 m
from this unit.
0
The transmitted beam may not be effective or may cause incorrect
operation when the sensor is directly exposed to sunlight or powerful
lighting.
Preparing the Remote Control
.
Using the Remote Control for the First Time
.
0
A button battery (CR2025) is included inside the remote control at the time
of purchase.
Remove the insulation sheet before use.
Reinserting the Battery
.
0
Pull out the battery holder by pressing the lock tab.
0
Insert the button battery with the + side facing upward.
Operation Buttons on Remote Control Unit
.
1
Recording Start/Stop Button
0
Starts/stops video recording.
2
Still Image Button
0
Takes a still image.
3
Zoom Button
0
T: Zooms in
0
W: Zooms out
4
Basic Playback Operations
Operation Button Description
Playback/Pause
Button
d / e
0
Starts/pauses playback of videos or slideshows.
Left Button j
0
Moves the cursor to the left.
0
Performs reverse search during playback.
Right Button i
0
Moves the cursor to the right.
0
Performs forward search during playback.
T Button N
0
Turns up (+) the volume during video playback.
W Button O
0
Turns down (-) the volume during video
playback.
5
Index Button
0
Stops playback and returns to index screen.
6
Info Button
0
Recording: Displays the remaining time (for video only) and battery
power.
0
Playback: Displays file information such as recording date.
Getting Started
23