Changing the Media of the DVD Writer
Set the type of media according to the loaded DVD.
1
Prepare a DVD writer.
“Preparing a DVD Writer (CU-VD3U)” (A p. 93)
“Preparing a DVD Writer (CU-VD50U)” (A p. 94)
2
Tap “CHANGE REC. MEDIA” in the “BACK-UP” menu.
.
3
Tap “DVD(AVCHD)” or “DVD-Video”.
.
0
The media changes to the tapped item. Select the appropriate setting
according to the disc.
0
Selecting “DVD(AVCHD)” enables you to save videos in a DVD in the
high definition quality.
0
Selecting “DVD-Video” enables you to save videos in a DVD after
converting to the standard image quality.
Preparing a DVD Writer (CU-VD3U)
1
Connect the USB cable and the AC adapter.
0
Turn off the camcorder by pressing the M button for about 2 seconds.
.
* The AC adapter shown in the illustration is AC-V11U.
A Connect the USB cable of the DVD writer to this unit.
B Connect the AC adapter of the DVD writer.
C Connect the AC adapter to this unit.
0
This unit powers on automatically when the AC adapter is connected.
0
This unit turns on and the “BACK-UP” menu appears.
0
While the USB cable is connected, the “BACK-UP” menu is
displayed.
0
Refer also to the instruction manual of the DVD writer.
2
Insert a new disc.
.
A Press the eject button to open the disc tray.
B Pull out the tray completely and load a new disc properly.
C Push the disc tray in until it clicks into place.
Caution :
0
Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.
Copying
93
To Next Page
Loading...
