Manual Recording (Continued)
Menus Settings: [ ] = Factory-preset
=
WB
Adjusts the white balance to
achieve the optimum colors
for the amount of light in your
surroundings during recording.
@ [AUTO]: White balance is adjusted automatically.
3 MANUAL:
B MWB: Adjusts the white balance manually depending on
the light source.
1) Hold a sheet of plain white paper in front of
the camcorder so that the white paper fills
the screen.
2) Keep touching
OK until the B indicator
appears.
D FINE: When shooting outdoors on a sunny day.
E CLOUD: When shooting outdoors on a cloudy day.
F HALOGEN: When a video light or similar type of lighting is
used.
PHOTOMETRY AREA
Enables you to adjust the
brightness in the desired spot
when backlight compensation
does not work well.
6
[WHOLE SCREEN]: Brightness is adjusted automatically
for whole screen.
7
SPOT: Brightness for the specified spot is adjusted
automatically.
w EFFECT
Enables you to record videos or
still images with special effects.
1 [OFF]: No effect is used.
J SEPIA: The image has a brownish tint like old still images.
K MONOTONE: The image becomes black and white like old
movies.
L CLASSIC FILM*: This effect skips frames to give images of
an old movie atmosphere.
M STROBE*: The image looks like a series of consecutive
snapshots.
* ! mode only
t TELE MACRO
Enables you to shoot a
subject as large as possible
at a distance of approx. 50 cm
(1.64 ft).
1 [OFF]: Deactivates the function.
0 ON: Activates the function.
NOTE
Set [TELE MACRO] to [OFF] if you will not take close-up still
images.
Non-close-up still images will be blurred if [TELE MACRO] is set to
[ON].
To Next Page
Loading...
