Dubbing Files from a VCR/DVD Player
Preparation:
•
Set [SWITCH TO ANALOG I/O] to [INPUT].
(Z p. 63)
•
Turn off all units.
To connect using the AV connectors
(analog dubbing)
1 Open the LCD monitor to turn on the
camcorder.
2 Start playback on the VCR/DVD
player.
3 Press START/STOP on the camcorder
at the scene where you want to start
recording.
To stop recording
Press START/STOP again.
NOTE
•
If [COPY PROTECTED CONTENT] appears,
the file is protected and cannot be recorded.
•
If the videos you want to record contain both
16:9 and 4:3 screen size, recording stops
where the aspect ratio switches. To record
such videos, you need to perform recording
operation at every switching point.
AV Cable
DC Connector
AC Adapter
To AC Outlet
AV Connector
VCR/DVD Player
AV Connector
(Output)
Copying Files (Continued)
To Next Page
Loading...
