Protecting Files
Preparation:
•
Select ! or # mode.
•
Select the playback mode.
1 Touch MENU.
2 Select [EDIT].
3 Select [PROTECT/CANCEL].
Protecting the Currently Displayed File
After performing steps 1-3
4 Select [CURRENT].
5 Select [YES].
You can select the previous or next file by
selecting { or }.
To quit the screen
Select [QUIT].
Protecting Selected Files
After performing steps 1-3
4 Select [FILE SELECT].
5 Select the desired file and select x.
•
The x (protection) mark appears on the
file. To select other files, repeat this step.
•
To check the content of the file, select
[CHECK].
6 Select [QUIT].
7 Select [YES].
To release protection
Select the protected file in step 5.
Managing Files (Continued)
To Next Page
Loading...
