R
Making Backup on the PC
Preparation:
•
Install the software to the PC.
•
Make sure that enough free space is left in
the PC’s HDD.
•
Close the LCD monitor to turn off the
camcorder.
1 Open the LCD monitor to turn on the
camcorder.
2 Select [BACK UP].
Everio MediaBrowser starts on the PC.
3 Click [All volume in camcorder] and
click [Next].
4 Click [Start].
Backup starts.
To disconnect the camcorder from the
PC
1) Right-click the icon (Safely Remove
Hardware) on the task bar and select
[Safely remove USB Mass Storage
Device].
2) Follow the on-screen instructions and
make sure that the device can be safely
removed.
3) Disconnect the USB cable and close the
LCD monitor.
NOTE
It takes time to back up many videos.
USB Connector
USB Cable
USB Connector
To Next Page
Loading...
