20
EN
RECORDING/PLAYBACK
Zooming
Preparation:
•
Select the recording mode.
•
Select ! or # mode.
Zoom out Zoom in
W: Wide angle T: Telephoto
You can also zoom out/zoom in by selecting
[W] or [T] on the LCD monitor. (On-screen
zoom control)
Zoom ratio (factory-preset)
! mode # mode
[8X/DYNAMIC] [5X/OPTICAL]
To change the maximum zoom ratio
(! mode only)
Change the settings in [ZOOM].
Flash
Preparation:
•
Select the recording mode.
•
Select # or M mode.
1 Press FLASH.
2 Select the desired setting.
6
Disables this function.
7
The flash fires automatically.
8
The flash fires automatically
but reduces the red-eye
phenomenon of the subject’s
eyes.
9
The flash fires regardless of the
shooting condition.
:
The flash fires. The shutter
speed becomes slower, so
the background can also be
brightened.
The flash is set to 7 (auto) by default.
When Scene Select (Z p. 22) is selected,
the flash is automatically set to auto
and fires automatically according to the
Scene Select setting
Recommended shooting distance
Within 2 m (6.6 ft).
NOTE
The flash does not work during CONTINUOUS
SHOOTING and BRACKETING.
Checking the Remaining Battery
Power
! mode:
Press INFO twice or INFO and then select
;
.
# mode:
Press INFO.
To quit the screen
Select [QUIT] or press INFO.
NOTE
The recordable time display should only be
used as a guide. It is displayed in 10 minute
units.
Checking the Remaining Space on
the Recording Media
Preparation:
•
Select the recording mode.
•
Select ! mode.
Press INFO.
The maximum recording time is displayed for
each video quality mode.
To change the video quality
1) Select the video quality.
2) Select
[SET].
To quit the screen
Select [QUIT].
Recording Files (Continued)
To Next Page
Loading...
