JVC EXAD KW-AVX800 - Monitor Screen Operation Buttons; Displaying and Hiding Playback Controls; Menu Navigation and Input Methods

20
ENGLISH
Touch the screen (center portion).
Operation buttons on the monitor screen
You can display the following operation buttons while watching the playback pictures on the monitor.
• While the operation buttons are displayed, aspect ratio is fixed to <Full> (☞ page 59).
• If no operation is done for about 5 seconds, the operation buttons disappears (except when a disc menu is
displayed).
Touch [KEY].
☞ pages 23 to 25 on how the operation buttons
particularly work for a variety of the discs
To erase the operations, touch the screen again.
A
[SOURCE] Display the <Source Menu>
[
AV MENU] Display the <AV Menu>
[
SHORT CUT] Display the Short Cut buttons
[
3 / 8] Start and pause playback
[
7] Stop playback
[
4 ¢] Press: Select track
Hold: Reverse/forward search
[
5 ∞] Select folders
• The above buttons also work when they are not shown on
the touch panel (while watching pictures on the screen).
* While a disc menu is played back for DVD, [KEY] is
automatically displayed. On the disc menu, you can select a
menu item directly by touching it on the screen.
B
For DVD/VCD/DivX menu operation playback
[
2 3 5 ∞] Select the menu items
[
ENT] Confirm the selection
[
TOP MENU] Display the disc menu
[
MENU] Display the disc menu
[
RETURN] Return to the previous menu or display the
menu (only for VCD with PBC)
C
For entering the numbers
[
DIRECT CLR] Switch between chapter/track entry and
title/group/folder entry
Erase the last entry when you enter a wrong
number
[
0]–[9]=[ENT] Enter the number
Ex. To enter “105”: press [
1], [0], [5], then [ENT]
*
Touch [KEY].
Touch [KEY].
EN16-36_KW-AVX800E_f.indd 20EN16-36_KW-AVX800E_f.indd 20 07.2.15 10:46:52 AM07.2.15 10:46:52 AM