JVC EXAD KW-AVX800 - DAB Preset Service Selection; Announcement Standby Reception for DAB

48
ENGLISH
Selecting preset services
On the remote:
1
2
On the unit:
To select from the Preset List
1
2
Activating/deactivating TA/PTY
Standby Reception
• Operations are exactly the same as explained on page
14 for FM RDS stations.
• You cannot store PTY codes separately for the DAB
tuner and for the FM tuner.
Activating/deactivating
Announcement Standby
Reception
Announcement Standby Reception allows the
unit to switch temporarily to your favorite service
(announcement type).
Announcement Standby Reception Indicator
To activate, display <AV Menu>,
then select <Mode>, press [On] for
<Announce Standby> (☞ below).
ANN
The unit will temporarily switch to your
favorite service from any source other
than FM/AM.
Lights up
Not yet activated. Tune in to another
service providing the related signals.
Flashes
To deactivate, press [Off] for
<Announce Standby> (☞ below).
Goes off
To activate Announcement Standby
Reception
1 Press [AV MENU].
2 Press [Mode].
3
Announcement Standby Reception is now
activated for PTY code <Transport News>: the
initial setting.
EN37-54_KW-AVX800E_f.indd 48EN37-54_KW-AVX800E_f.indd 48 07.2.13 10:07:32 PM07.2.13 10:07:32 PM