10
ENGLISH
When an FM stereo broadcast is
hard to receive
1 Press [AV MENU].
2 Press [Mode].
Listening to the radio
~
Press [SOURCE], then press [TUNER]. ] (☞ page 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Press [BAND].
! Press [4] or [¢] to search for a station—Auto Search.
• Manual Search: Hold either [4]or [¢] until “Manual Search” appears on the display, then press it
repeatedly.
• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
3
Reception improves, but stereo effect will be lost.
• The MONO indicator lights up.
To restore stereo effect, select <Off>.
Preset No.
Band
Tuner/Standby
Reception indicators
PS (station name) for FM RDS. If no PS signal is coming in,
the tuned frequency appears.
☞ page 9
Sound mode
(
☞ page 55)
PTY code for FM RDS
☞ page 12
: Buttons on the
touch panel. In the
explanation, they
are indicated inside
[ ].
EN08-15_KW-AVX800E_f.indd 10EN08-15_KW-AVX800E_f.indd 10 07.2.13 10:04:55 PM07.2.13 10:04:55 PM
To Next Page
Loading...
