JVC EXAD KW-AVX800 - Bluetooth Cellular Phone Operations; Connecting Your Bluetooth Phone; Call Management and Voice Dialing

39
EXTERNAL DEVICES
ENGLISH
Using the Bluetooth cellular phone
Adjust the volume of the incoming calls*
2
When a call comes in...
The source is changed to “Bluetooth PHONE”
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming calls automatically. (☞
page 67)
☞
page 41
Continued on the next
p
a
g
e
When <Auto Answer> is deactivated...
To answer the incoming call
• Press any button on the monitor panel (except
/ATT or +/–).
• Press the message displayed on the touch panel.
To end the call
• Hold any button on the monitor panel (except
/ATT or +/–).
• Hold the message displayed on the touch panel.
• You can adjust the microphone volume. (☞ page 67)
~ Press [SOURCE], then press [Bluetooth PHONE]. (☞ page 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Press [AV Menu].
! Press [Bluetooth].
⁄ Establish the connection with a device, then make a call (or settings using the
<Bluetooth> menu).
☞ pages 66 and 67
Sound mode
(
☞ page 55)
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
[
AV MENU ] Hold: Activates <Voice Dialing>
[5 ∞] Select the registered device
(“New Device” appears when a new device can be
registered.)
Bluetooth icon
lights up when
the adapter is
connected.
: Buttons on the touch panel. In the
explanation, they are indicated inside
[ ].
*
1
When a cellular phone with audio function is connected, appears.
*
2
This adjustment does not affect the volume level of the other sources.
*
1
EN37-54_KW-AVX800E_f.indd 39EN37-54_KW-AVX800E_f.indd 39 07.2.13 10:07:19 PM07.2.13 10:07:19 PM