JVC EXAD KW-AVX800 - Monitor and Touch Panel Operations; Accessing AV and Source Menus; Display Information and Source Selection; Unit Reset Procedure

5
ENGLISH
INTRODUCTION
Basic operations — Monitor panel/touch panel
• Turn on the power.
• Turn off the power [Hold].
• Attenuate the sound (if the power is on).
Change the sources.
• ☞ page 9.
Remote sensor
Adjust the volume.
Reset the unit.
• Use only when the internal system malfunctions.
Display <AV Menu>.
• ☞ page 57.
Display and erase the Short Cut windows.
Available functions vary among the sources. For details, see each source
operation section.
Change the display information.
• [OPEN]: Open the monitor panel.
• [EJECT]: Eject the disc.
• [CLOSE]: Close the monitor panel.
• [TILT +/–]: Tilt the monitor panel.
• [Exit]: Erase this screen.
• Shaded icons cannot be used at that time.
• For details on the touch panel operations,
see each source operation sections.
Display <Source Menu>.
• ☞ pages 9 and 30.
• Activate/deactivate TA
Standby Reception.
• Display <PTy Search> [Hold].
• ☞ page 12.
• Display the <Open/Tilt> screen
• Eject the disc and display the <Open/Tilt>
screen [Hold].
• Close the monitor panel when the <Open/Tilt>
screen is displayed.
EN02-07_KW-AVX800E_f.indd 5EN02-07_KW-AVX800E_f.indd 5 07.2.13 10:04:20 PM07.2.13 10:04:20 PM