JVC EXAD KW-AVX800 - Media Control Screen Operations; Selecting Folders and Tracks from Lists

OPERATIONS
31
ENGLISH
To select a folder or track
1 Select “Folder” column or “Track” column on
the control screen.
2 Select a folder or track.
• If necessary, press ENT to start playback.
1 Playback mode selection window: appears when
OSD is pressed (☞ page 32).
2 Selected playback mode (☞ page 32)
3 Elapsed playing time of the current track
4 Operation status
5 Current track number/total number of tracks on the
disc
6 Track information
7 Track list
8 Current track (highlighted bar)
To select a track
• If necessary, press ENT to start playback.
Operations using the control
screen
For discs except DVD and VCD:
While Dual Zone is on, these operations are possible on
the external monitor using the remote controller.
The control screen automatically appears when you
insert a disc. (For DivX/MPEG1/MPEG2/JPEG; while not
playing.)
• When Dual Zone is off, you can only watch the control
screen, but cannot operate it.
Ex.: MP3/WMA
1 Current folder (highlighted bar)
2 Current folder number/total folder number
3 Folder list
4 Selected playback mode (☞ page 32)
5 Elapsed playing time of the current track (not
displayed for JPEG)
6 Operation status
7 Current track number/total number of tracks in the
current folder (total number of tracks on the disc)
8 Track information (only for MP3/WMA/WAV/AAC)
9 Track list
p Current track (highlighted)
* If tag data includes “Jacket Picture” (baseline JPEG), it
will be displayed.
Ex.: CD Text


Continued on the next page
EN16-36_KW-AVX800E_f.indd 31EN16-36_KW-AVX800E_f.indd 31 07.2.21 7:11:06 PM07.2.21 7:11:06 PM