JVC GC-PX100 Detailed User Guide

7
Enter the name (SSID) of the access point (wireless LAN router) and tap
“SET”.
(Operation on this camera)
.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap E or F to move one space to the left or right.
8
Select the type of authentication method (security).
(Operation on this camera)
.
0
Select according to the setting of your router.
9
When authentication method is not set to “NONE”, enter a password
and tap “SET”.
(Operation on this camera)
.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap E or F to move one space to the left or right.
10
After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
o
WPS PIN Registration
1
Tap “MENU”.
(Operation on this camera)
.
0
The top menu appears.
2
Tap the “Wi-Fi” (
Q
) icon.
(Operation on this camera)
.
3
Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
4
Tap “ACCESS POINTS”.
(Operation on this camera)
.
5
Tap “ADD”.
(Operation on this camera)
.
Using Wi-Fi
118

JVC GC-PX100 Specifications

General

Brand	JVC
Model	GC-PX100
Category	Camcorder
Language	English