I ConnectionsToA TVOr VCR
To AV _
connector
Open the cover.
Audio/Video
cable
D Yellow to VIDEO IN (Connect when your TV/
VCR has only AN input connectors.)
D Red to AUDIO R IN*
D White to AUDIO L IN*
Not required for watching still images only.
wu_urL_v_Lr_ EN J]
1Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3 Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6 Start playback on the camcerder. ( pg. 20)
To choose whether or not the following
displays appear on the connected TV
• Date/Time
Set "DATE/TIME" to "AUTO", "ON" or "OFF".
(pg. 22, 27)
• Time Code
Set "TIME CODE" to "ON" or "OFF". ._
( pg. 22, 27) €
• Indications other than date/time and time code
Set ON SCREEN" to OFF", "LCD" or LCD/TV".
(pg. 22, 27)
NOTES:
• It is recommended to use the AC Adapter as
the power supply instead of the battery pack. u
( pg, 13)
• To monitor the picture and sound from the
C
camcorder without inserting a tape, set the S
camcorder's Power Switch to "E3" or "_", then set
your TV to the appropriate input mode.
• Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
To Next Page
Loading...
Need help?
General
