EN 11
GETTING STARTED
MasterPage: Start_Right
GETTING STARTED
How To Attach The Lens Cap
To protect the lens, attach
the provided lens cap to the
camcorder as shown in the
illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is
flush to the camcorder.
How To Attach The Shoulder Strap
Open the pad and make grip adjustments.
● Before making the adjustment, remove any
security tags that may be attached to the
velcro.
1 Peel off the pad
and thread the end
of the strap
through the eyelet.
2 Thread the
strap through the
buckle, adjust its
length, and use the
strap guide to fix it
in place.
3 Position the
buckle near the
eyelet and reattach
the pad.
Place here during
shooting.
Eyelet
Strap Guide
Buckle
Grip Adjustment
GR-D750AS_EN.book Page 11 Tuesday, January 23, 2007 5:33 PM
To Next Page
Loading...
Need help?
General
