EN 27
FEATURES FOR RECORDING
MasterPage: Start_Right
ADVANCED FEATURES
Manual exposure control is recommended in
the following situations:
●
When shooting using reverse lighting or when
the background is too bright.
● When shooting on a reflective natural
background such as at the beach or when
skiing.
● When the background is overly dark or the
subject is bright.
1 Open the LCD monitor fully.
2 Set the Power Switch to “REC”.
3 Set the recording mode to “
M
”. ( pg. 18)
4 Press MENU.
5 Select “FUNCTION”, press SET or 2.
6 Select “EXPOSURE”, press SET or 2.
7 Select the appropriate exposure, press SET
or
2.
●
To brighten the image, press 3. To darken the
image, press 4. (maximum +/-6)
8 Press MENU.
NOTES:
● If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(
pg. 22, 23)
● You cannot use the manual exposure control at
the same time when “PROGRAM AE” is set to
“SPOTLIGHT” or “SNOW” (
pg. 30), or with
the backlight compensation.
Like the pupil of the human eye, the iris
contracts in well-lit environments to keep too
much light from entering, and dilates in dim
environments to allow in more light.
Use this function in the following situations:
●
When shooting a moving subject.
● When the distance to the subject changes (so
its size in the LCD monitor or the viewfinder
changes), such as when the subject is backing
away.
● When shooting on a reflective natural
background such as at the beach or when
skiing.
● When shooting objects under a spotlight.
● When zooming.
1 Perform steps 1 - 6 in “Exposure Control”
( pg. 27)
2 Adjust zoom so that the subject fills the
LCD monitor or the viewfinder, then press and
hold SET or
2 for over 2 seconds. The “”
indication appears.
3 Press SET or 2. The iris is locked.
4 Press MENU.
Exposure Control
1
Select
2
SET
Iris Lock
GR-D750AS_EN.book Page 27 Tuesday, January 23, 2007 5:33 PM
To Next Page
Loading...
Need help?
General
