EasyManuals Logo

JVC GR-D750AS User Manual

JVC GR-D750AS
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
VIDEO RECORDING
18 EN
MasterPage: Left
Time Code
During recording, a time code is recorded on
the tape. This code is to conrm the location of
the recorded scene on the tape during
playback.
* Frames are not displayed during recording.
If recording starts from a blank portion, the
time code begins counting from 00:00:00
(minute:second:frame). If recording starts from
the end of a previously recorded scene, the
time code continues from the last time code
number. If during recording a blank portion is
left partway through the tape, the time code is
interrupted. When recording is resumed, the
time code starts counting up again from
00:00:00. This means the camcorder may
record the same time codes as those existing
in a previously recorded scene. To prevent this,
perform Recording From The Middle Of A Tape
( pg. 18) in the following cases;
When shooting again after playing back a
recorded tape.
When power shuts off during shooting.
When a tape is removed and re-inserted during
shooting.
When shooting using a partially recorded tape.
When shooting on a blank portion located
partway through the tape.
When shooting again after shooting a scene
then opening/closing the cassette holder cover.
NOTES:
The time code cannot be reset.
During fast-forwarding and rewinding, the time
code indication does not move smoothly.
The time code is displayed only when TIME
CODE is set to ON. (
pg. 24)
Recording From The Middle Of A Tape
1) Play back a tape or use Blank Search
( pg. 20) to nd the spot at which you want
to start recording, then engage the Still
Playback mode. ( pg. 19)
2) Set the Power Switch to REC while
pressing down the Lock Button located on the
switch, then start recording.
Auto/Manual Mode
Press AUTO button repeatedly to switch to
auto/manual recording mode. When manual
mode is selected, the indicator
M
appears
on the LCD monitor.
Auto Mode :
A
You can record using no special effects or
manual adjustments.
Manual Mode :
M
Manual recording is possible by setting various
functions
.
12:34:24
Minutes
Seconds
Frames*
(25 frames =
1 second)
Display
MANUAL
AUTO
GR-D750AS_EN.book Page 18 Tuesday, January 23, 2007 5:33 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC GR-D750AS and is the answer not in the manual?

JVC GR-D750AS Specifications

General IconGeneral
BrandJVC
ModelGR-D750AS
CategoryCamcorder
LanguageEnglish

Related product manuals