FEATURES FOR RECORDING
28 EN
MasterPage: Left
Backlight compensation brightens the subject
quickly.
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
1 Set the Power Switch to
“REC”.
2 Set the recording mode to
“
M
”.
( pg. 18)
3 Press so that the
Backlight Compensation
indicator “” appears.
To cancel Backlight Compensation
Press twice so that the “” indicator
disappears.
NOTE:
Using Backlight Compensation may cause the
light around the subject to become too bright and
the subject to become white.
Selection of a spot metering area enables
more precise exposure compensation.
1 Set the Power Switch to “REC”.
2 Set the recording mode to “
M
”. ( pg. 18)
3 Press twice so that the Spot Exposure
Control indicator “” appears.
●
A spot metering area frame appears at the
centre of the LCD monitor/viewfinder.
4 Press SET.
●
Spot Exposure Control is engaged.
● Exposure is adjusted to make the brightness of
the selected area most appropriate.
To lock the iris
After step 3, press and hold SET over 2
seconds. The “” indication appears and the
iris is locked.
To cancel Spot Exposure Control
Press once so that the “” indicator
disappears.
NOTES:
● Depending on the shooting location and
condition, optimum result may not be attained.
● “STROBE” in “EFFECT” cannot be used with
Spot Exposure Control.
Backlight Compensation
SET
Spot Exposure Control
GR-D750AS_EN.book Page 28 Tuesday, January 23, 2007 5:33 PM
To Next Page
Loading...
Need help?
General
