EasyManua.ls Logo

JVC GR-D770AG

JVC GR-D770AG
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D.S.C. PLAYBACK
30 EN
MasterPage: Left
To Print By Selecting Still Images And
Number Of Prints
1 Perform steps 1 3
in To Print All Still
Images (One Print For
Each) ( pg. 29).
2 Select CURRENT,
press SET or
2. The
DPOF screen appears.
3 Press 1 or 2 to select the desired le.
4 Press 4 or 3 to select the number
indication (00), and press SET.
5 Select the number of prints
by pressing
3 to increase the
number, or
4 to decrease the
number, and press SET.
Repeat steps 3 through
5 for the desired number
of prints.
The number of prints can
be set up to 15.
To correct the number of
prints, select the image
again and change the number.
6 Select RETURN,
press SET. The SAVE?
appears.
If you did not change any
settings in step
3
through
5, the DPOF
Menu reappears.
7 Select EXECUTE, press SET.
To cancel selection, select CANCEL.
To Reset The Number Of Prints
1 Perform steps 1 3 in To Print All Still
Images (One Print For Each) ( pg. 29).
2 Select RESET, press SET or 2. The
DPOF screen appears.
3 Select EXECUTE, press SET.
To cancel selection, select RETURN.
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
NOTE:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with DIS
de-activated ( pg. 32) this can be avoided.
You can initialise a memory card any time.
After initialising, all les and data stored in the
memory card, including those which have
been protected, are cleared.
1 Perform steps 1 3 in Normal Playback
Of Images ( pg. 27).
2 Press MENU.
3 Select FORMAT, press SET
or
2. The FORMAT screen
appears.
Press 1 whenever you want to
return to the previous menu
screen.
4 Select EXECUTE,
press SET. The memory
card is initialise.
When initialisation is
nished, NO IMAGES
STORED appears.
To cancel initialisation,
select CANCEL.
DPOF
SHEETS
RETURN
02
Select
1
Select
2
SET
DPOF
SHEETS
02
CANCEL
DPOF
SAVE?
EXECUTE
Initialising A Memory Card
1
Select
2
SET
CANCEL
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
GR-D770AG_EN.book Page 30 Tuesday, December 5, 2006 1:47 PM

Table of Contents

Related product manuals