JVC GR-DV1 User Manual

21
1
SELECT OPERATION MODE
Set the Power Dial to “REC” and set the Select
Dial to “MANUAL”.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears in
the viewfinder.
3
ACCESS SYSTEM MENU
Place the pointer next to “TO SYSTEM MENU”
by sliding the Zoom Lever, then press SET. The
System Menu appears in the viewfinder.
4
SELECT FUNCTION
Place the pointer next to the desired function
by sliding the Zoom Lever, then press SET. The
pointer stops blinking, indicating that the
function has been selected.
5
SET FUNCTION PARAMETERS
Slide the Zoom Lever in either direction to
cycle through the available settings for the
selected function, and stop when the desired
setting appears. Then press SET, and the
pointer automatically moves to “END”.
•To set the parameters for a different function,
repeat steps 4 and 5.
6
CLOSE SYSTEM MENU
Press SET twice. Setting is complete and the
System Menu disappears.
System Menu
The System Menu allows you to set the following functions: Scene, Beep, Wind Cut, Sound Mode and ID
numbers.
FOCUS
EXP.
WB
PRO
AUTO
SET
T
W
WIDE MODE
ZOOM
DIS
GA I N UP
TO FADER / W IPE MENU
TO P . AE / EFFECT MENU
TO DATE / TIME MENU
TO SYSTEM MENU


END
OFF
20X
OFF
AGC
ITEM ZOOM SW . 
SET SET BUTTON


SCENE
BEEP
WIND CUT
SOUND MODE 
I D No .



END
5S
ON
OFF
48 kHz 
07
ITEM ZOOM SW . 
SET SET BUTTON
MANUAL
ZOOM LEVER
SET BUTTON
POWER DIAL
SELECT DIAL
MENU BUTTON
VIEWFINDER
RECORDING MENU
VIEWFINDER
SYSTEM MENU

JVC GR-DV1 Specifications

General

Brand	JVC
Model	GR-DV1
Category	Camcorder
Language	English