57
3
PLAY BACK DUBBED SCENE
•If any images from the scene prior to the
transition you chose for your Edit-In point
were recorded, that means your VCR moves
quickly from RECORD/STANDBY to
RECORD.
•If the scene you tried to dub starts in
progress, the VCR is slow to start recording.
CONTINUED ON NEXT PAGE
For More Accurate Editing
Some VCRs make the transition from RECORD/STANDBY to RECORD mode faster than others. Even if you
begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or
find that you’ve recorded scenes you didn’t want. For a cleanly edited tape, confirm and adjust the timing of
the camcorder against your VCR.
1
PREPARE FOR R.A. EDIT
Play back the tape in the camcorder, then point
the remote control at the Docking Station’s
sensor and press R.A. EDIT ON/OFF.
•”R.A. EDIT” appears on the TV screen.
2
CHOOSE A SCENE
Perform Random Assemble Editing on
PROGRAM 1 only. In order to check VCR and
camcorder timing, select the beginning of a
scene transition as your Edit-In point.
1
2
3
4
5
6
7
8
T I ME CODE
TOTAL
00: 00
~
~
~
~
~
~
~
~
IN
OUT
: :
:
TW
REMOTE SENSOR
R.A.EDIT PROGRAM SCREEN
ON/OFF BUTTON
PROGRAM 1
RM-V708U
(provided)
VCR (Recording deck)
To Next Page
Loading...
Need help?
General
