68 EN
INDEX
Indications
LCD Monitor/Viewfinder Indications During Video Recording Only
1 Displays the selected Fade/Wipe effect.
(墌 pg. 26, 27)
2 Appears when in the Squeeze or Cinema
mode. (墌 pg. 24)
3
*
Displays the recording mode (SP or LP).
(墌 pg. 12)
4
*
Displays the tape remaining time. (墌 pg. 14)
5
*
•“REC” appears during recording.
•“PAUSE” appears during Record-
Standby mode. (墌 pg. 14)
6 Appears when the wind cut mode is engaged
to cut down on noise created by wind.
(墌 pg. 25)
7 Appears while the tape is running. (墌 pg. 14)
8 Displays the sound mode for approx.
5 seconds after turning on the camcorder.
(墌 pg. 23)
9 Displays the Time Code. (墌 pg. 19, 25)
*Setting “ON SCREEN” to “SIMPLE” in the Menu
Screen removes indications marked with * from the
screen (墌 pg. 25, 32).
1 Appears when the VIDEO/DSC Switch is set to
“ ” and the Power Switch is set to “ ” or
“ ”.(墌 pg. 13, 17)
2 Appears and blinks during shooting. (墌 pg. 17)
3 Displays the Picture Quality mode of the stored
image. There are 2 modes available:
FINE and STD (Standard). (墌 pg. 12, 17)
4 •Appears during shooting.
•Blinks when a MultiMediaCard is not loaded.
(墌 pg. 17)
5 Displays the number of images that have already
been shot. (墌 pg. 17)
6 Displays the total number of shots that can
be stored, including those already taken.
(墌 pg. 17)
LCD Monitor/Viewfinder Indications During D.S.C. Recording Only
TC
S
2
O
3
U
:
N
2
D
5
12
BIT
SP
3
R
4
5
E
4
C
4
9 8
1 2 3
*
4
*
7 6 5
*
DSC
STD
10/50
1 532 4 6
To Next Page
Loading...
