60 EN
COP Y OFF
ON
–
SP
6
P
L
A
Y
O
F
F
Play/Pause Button
(4/6)
Display
Power Switch
SNAPSHOT
Button
Dubbing Still Images Recorded On A Tape
To A Memory Card
(GR-DVX88/DVX77 only)
Still images can be dubbed from a tape to a memory
card.
1
Load a memory card (墌 pg. 14) and cassette
(墌 pg. 12).
2
Select the Snapshot mode in the Menu Screen
(墌 pg. 26) to use for dubbing the image to the
memory card.
3
Set the VIDEO/DSC Switch to “VIDEO”, then set the
Power Switch to “ ” while pressing down the
Lock Button located on the switch.
4
Press the MENU Wheel in. The Menu Screen
appears. Rotate it to select “ VIDEO” and press
it. The VIDEO Menu appears.
5
Rotate the MENU Wheel to select “
COPY” and press it. The Sub Menu appears. Rotate
it to select “ON” and press it. Selection is complete.
6
Rotate the MENU Wheel to select “ RETURN” and
press it twice. The normal playback screen resumes.
7
To select a still image to be dubbed, start playback
by pressing 4/6. At the moment you find the
image you wish to dub, press it again to engage Still
Playback.
8
To start dubbing, press SNAPSHOT. The selected
image is stored in the memory card.
•“ ” blinks during dubbing.
NOTES:
●
If SNAPSHOT is pressed in step 8 when a memory card
is not loaded, the message “COPYING FAILED” is
displayed.
●
If an image recorded on the tape using the WIDE mode
(
墌
pg. 40) is dubbed to a memory card, the WIDE
mode identifying signal is not dubbed with it.
●
To use Playback Special Effects with a video image you
wish to dub, perform up to step 8 using the remote
control (provided) (
墌
pg. 65).
●
Images are dubbed in VGA file size.
MENU Wheel
Lock Button
DUBBING
(cont.)
VIDEO Menu
VIDEO/DSC Switch
To Next Page
Loading...
