EN45
IM
1
A
3
G
/
E
24
100
–
0013
IM
1
A
0
G
/
E
24
100
–
0010
IM
1
A
1
G
/
E
24
100
–
0011
IM
1
A
2
G
/
E
24
100
–
0012
F
O
C
U
S
B
A
C
K
L
I
G
H
T
E
X
P
O
S
U
R
E
POWER Switch
Normal Playback
Images shot with the camcorder are automatically
numbered, then stored in numerical order in the
MultiMediaCard. You can view the stored images, one at a
time, much like flipping through a photo album.
1
Load a MultiMediaCard (墌 pg. 12).
2
Set the POWER Switch to “
M
EM
O
R
Y
PLAY
” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
•A stored image is displayed.
3
Press
3
to display the next image.
Press
2
to display the previous image.
Auto Playback
You can run through all the images stored in memory
automatically.
1
Perform steps 1 and 2 above.
2
Press
4
/6.
•If you press
2
during Auto Playback, images are
displayed in descending order.
•If you press
3
during Auto Playback, images are
displayed in ascending order.
3
To end Auto Playback, press 5.
NOTES:
●
Even if you shoot a new image after playing back a low-
numbered one, this will not overwrite an existing image,
because new images are automatically stored after the
last-recorded one.
●
Image number, directory and file names appear if “ON
SCREEN” is set to either “LCD” or “LCD/TV” in the
Menu Screen (
墌
pg. 29).
PLAYBACK
Basic Playback For D.S.C.
[For Normal Playback]
To display the next image
Display
[For Auto Playback]
Stop Button (5)
To display the
previous image
Image number
Displays the index number of the image file (墌 pg. 46, 47).
Total number of images
Displays the total number of stored images.
Rewind Button (
2
)
Fast-Forward Button (
3
)
Directory and File names
Displays the directory and file names (墌 pg. 46, 47).
Play Button (
4
/6)
Lock Button
Downloaded from: https://www.usersmanualguide.com/
To Next Page
Loading...
