EN41
ZOOM (T/W)
PLAY
STOP
Press T
Normal playback
RM-V715U
(provided)
Remote sensor
Playback Zoom (GR-SXM46/SX41 only)
To magnify the recorded image up to 10X at any time
during playback.
NOTES:
●
Use the RM-V715U remote control unit to perform this
procedure.
●
Make sure that the TBC mode is activated (
Z
pg. 34).
1
Press PLAY to find the scene of interest.
2
Press the ZOOM Buttons (T/W) on the remote
control. Make sure the remote control is pointed at
the camcorder’s remote sensor. Pressing T zooms in.
To End Zoom . . .
.... press and hold W until magnification returns to
normal. Or, press STOP and then press PLAY.
NOTES:
●
Zoom can also be used during still playback.
●
Due to digital image processing, the quality of the image
may suffer.
●
After zooming in on a still video image, when normal
playback is started, the zoomed-in effect is momentarily
cancelled but then resumes, returning magnification to
the previously set level.
To Next Page
Loading...
