EasyManua.ls Logo

JVC GY-HM660U/GY-HM660E - Camera Setup for Network Connection; Connecting Via Wireless LAN

JVC GY-HM660U/GY-HM660E
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Camera Setup for Network Connection
1
Connect an appropriate adapter according
to the intended use to the
[HOST] terminal
at the rear of the camera recorder.
The following adapters can be connected.
0
Wireless LAN adapter
0
Ethernet adapter
0
Cellular adapter
.
AUX
INPUT2
INPUT1
DEVICE
AV
A
BATT.RE L EA S E
POWER
/CHG
B
HDMI
REMOTE
DC
HD/SD
SDI
REC
HOST
HOST
HOST
Connect an appropriate adapter
Memo :
0
Only a network connection adapter can be
connected to the
[HOST] terminal.
0
Connect
or disconnect an adapter only after you
have turned off the power of the camera
recorder.
0
You can find the latest information on the
compatible adapters at the product page of our
website.
0
Two
types of network coverage (WAN and LAN)
are available for each application.
2
Enable the network connection.
Set [Main Menu] B [System
] B [Network] to
“On(HDMI Off)” or “On(SDI Off)”.
3
Configure the connection settings.
0
Select [Main
Menu] B [System] B [Network]/
[Settings] B [Connection Setup] B [Wizard]
and press the Set button (R).
0
A wizard screen appears according to the
type of adapter connected. Follow the
instructions
on the screen to perform setting.
(A P150 [Connecting via Wireless LAN] )
(A P152 [Connecting via Wired LAN] )
(A P152 [Connecting via Cellular Adapter] )
Connecting via Wireless LAN
Connection via Access Point
1
Perform setting on the camera recorder,
and start up the
[Wizard] screen.
(A P
150 [Camera Setup for Network
Connection] )
2
[Wireless LAN] appears on the [Wizard]
screen.
.
3
Press the I button to display the
[Select
Connection Type] screen.
Select “Connect with Access Point”.
Follow the screen instructions to complete
setting. Perform setting for the following.
0
Mode of connection
0
Method of setting
*
SSID, type of encryption, Passphrase, and
IP Address setting (“DHCP” or “Manual”) in
cases other than WPS
.
3
4
Setting is complete.
After setting is complete, you can access the
camera recorder via a web browser.
(A P158 [Connecting from a Web Browser
a] )
150
Connecting to the Network
a

Table of Contents

Other manuals for JVC GY-HM660U/GY-HM660E

Related product manuals