How to brighten a dark recorded subject on JVC GZ-HD320?
If your JVC Camcorder's recorded subject appears too dark, you can try the following: * Use backlight compensation. * Set [GAIN UP] to [AGC] or [AUTO]. * Use [NIGHT] from scene select. * Adjust the brightness to the [+] side.
Why is the LCD monitor difficult to see on my JVC GZ-HD320?
If your JVC Camcorder's LCD monitor is hard to see, especially in bright conditions like direct sunlight, this is normal. The LCD monitor may be difficult to see if used in bright areas such as under direct sunlight.
What to do if JVC GZ-HD320 Camcorder recording cannot be performed?
If your JVC Camcorder is not recording, make sure you have selected the correct mode by sliding the mode switch to either the ! or # position.
How to fix the recorded subject if it is too bright on JVC Camcorder?
If your JVC Camcorder's recorded subject is too bright, set the backlight compensation to [OFF] if it is currently enabled. Also, try adjusting the brightness to the [–] side.
Why does digital zoom not work on my JVC GZ-HD320?
If digital zoom is not working on your JVC Camcorder, first check that you have changed the [ZOOM] setting to either [80X / DIGITAL] or [200X / DIGITAL]. Also, note that digital zoom is not available when the camcorder is in still image recording mode.
To Next Page
General
