JVC GZ-MG334 - Attaching the Core Filter to the USB Cable and DC Cord; Attaching the Shoulder Strap

11
ENGLISH
Attaching the Shoulder Strap
Peel off the pad and thread the
end of the strap through the
eyelet.
Thread the strap through the
buckle, adjust its length, and use
the strap guide to fi x it in place.
Position the buckle near the
eyelet and reattach the pad.
Eyelet
Strap Guide
Buckle
Attaching the Core Filter to the USB Cable and DC cord
Attach the core fi lter to the USB cable. Also, attach the core fi lter to the DC cord. The core fi lter
reduces interference. Connect the end of the cable with the core fi lter to the camera.
Release the stopper.
3 cm
USB cable: Wind once.
DC cord: Wind twice.