What to do if recording cannot be performed on JVC GZ-MG334?
If your JVC Camcorder is unable to record, it might be because the recording medium is full. Try deleting unnecessary files or replacing the microSD card. Also, ensure that you have selected the correct recording medium.
What to do if the focus is not adjusted automatically on JVC GZ-MG334?
If the focus on your JVC Camcorder isn't adjusting automatically, set the [FOCUS] to [AUTO]. Also, try cleaning the lens and then check the focus again.
Why during recording date/time does not appear on JVC GZ-MG334?
To display the date/time during recording on your JVC Camcorder, touch the DISP button once.
Why does JVC Camcorder remaining battery power differ from actual time?
If the displayed amount of remaining battery power differs from the actual operating time on your JVC Camcorder, fully charge the battery and then run it down. If the problem persists, the battery is likely worn out and needs to be replaced. Please purchase a new one.
What to do if JVC GZ-MG334 Camcorder image is displayed for a long time during video playback?
If the same image is displayed for a long time during video playback on your JVC Camcorder, or if the motion is choppy: * Replace the microSD card (as damage to the card's surface can cause difficulty in reading data). * Clean up or format the microSD card.
What to do if JVC GZ-MG334 Camcorder power does not turn on or battery life is short?
If your JVC Camcorder doesn't turn on or the battery life is very short, ensure you're using it within appropriate operating temperatures. Also, the battery might be worn out and need replacement; consider purchasing a new one.
What to do if JVC Camcorder power was turned off accidentally?
If your JVC Camcorder's power turned off accidentally: * Move to a place less affected by vibration or excessive sound. * The drop detection function may have operated. Close the LCD monitor and open it again. To disable this function, set [DROP DETECTION] to [OFF].
What to do if JVC Camcorder has no display?
If no display appears on your JVC Camcorder: * If the camera isn't operated for 5 minutes while on, it turns off to save power. To turn it back on when using the battery, close and reopen the LCD monitor. When using the AC adapter, perform any operation like zooming. * Adjust the brightness of the LCD monitor.
What to do if JVC GZ-MG334 Camcorder aspect ratio of the image is strange on TV?
If the aspect ratio of the image appears strange when watching images from your JVC Camcorder on TV, change the settings in [SELECT TV TYPE] to match the image's aspect ratio with the screen size of the connected TV.
What to do if JVC GZ-MG334 Camcorder touch sensor does not function?
If the touch sensor on your JVC Camcorder does not function, make sure to touch the sensors with your finger. The sensors won't work if you touch them with your fingernail or while wearing gloves.
General| Recording Format | MPEG-2 |
|---|---|
| Storage | HDD |
| Optical Zoom | 32x |
| LCD Screen Size | 2.7 inches |
| Weight | 340 g |
| Digital Zoom | 800x |
| Focus Adjustment | automatic, manual |
| Image Stabilizer | Electronic |
| White Balance | Auto, Manual |
| White Balance Presets | Daylight, Tungsten, Fluorescent |
| Display Type | LCD |
| Microphone Operation Mode | Stereo |
| Image Sensor | CCD |
| Still Image Format | JPEG |
| USB | Yes |
| AV Output | Yes |
| Type | Camcorder |
| Optical Sensor Size | 1/6 inch |
| Optical Sensor Resolution | 0.8 MP |
| Shooting Programs | Spotlight, sand & snow, portrait mode, sports mode |
| Connector Type | USB, AV |
| Included Accessories | AC Adapter, USB Cable |
| Battery Type | Li-ion |
| Microphone | microphone - built-in - stereo |
| Speaker | speaker - built-in |
Steps for preparing the camcorder for first use, including battery, lens, and LCD setup.
Instructions for selecting video mode and starting the recording process.
Steps to select playback mode and view recorded video or images.
Important safety guidelines and precautions for handling the lithium-ion battery pack.
Step-by-step instructions for charging the camera's battery pack using the AC adapter.
Guide to setting the camera's date and time accurately for proper recording.
Comprehensive guide on how to record video, including stopping and changing settings.
Steps for capturing still images, including focus, picture quality, and continuous shooting.
Steps to select video or still image mode and initiate playback.
Procedures for deleting files or protecting them from accidental deletion.
Lists common problems and provides actions to resolve them, including camera reset.
Detailed cautions regarding the handling, charging, and storage of the battery pack to prevent damage.
Guidelines to prevent data corruption or damage to the recording medium.
Precautions to prevent damage to the LCD monitor and prolong its service life.
Safety guidelines for the main unit, covering usage environments and preventing dropping.
To Next Page
