18 EN Video Recording
Preparation: Open the LCD monitor. (墌 pg. 10)
To stop recording
Press the REC/SNAP button again.
To change the picture quality (墌 pg. 57)
To register a file to an event (墌 pg. 19)
12
3
MENU
INDEX
Set the power switch to .
Slide while pressing down the lock
button.
Power off
Playback
Recording
Lock button
Set the MODE switch to .
● The camera is programmed to record
videos on the built-in hard disk when
it is shipped from the factory. To
change the recording medium, see
page 17.
: Video mode
: Still image mode
Press the REC/SNAP button
to start recording.
● Approximate remaining time for
recording appears.
[0h56m]
/ ///49
Zoom Lever
M6E6Asia.book Page 18 Friday, March 24, 2006 5:38 PM
To Next Page
Loading...
